The high, straight spring tines of the separate elements are guided accurately at the required working depth by one solidification roller at the front and two cage rollers at the rear – irrespective of the particular soil condition. The individual spring tine elements adapt exactly to the contour of the field in driving direction, thus the field is always worked equally deep and is levelled perfectly.

Due to the 5 rows of tines, a large number of tines with 6.5 cm tine spacing and the 3 rows of rollers, a perfect seedbed is created: on the top loose and fine, in the desired working depth well solidified and moist. The seeds find ideal conditions for an even and rapid germination.

Unlike 3-point implements that have to be operated at high tyre pressure, trailed devices only require a relatively low tyre pressure on the tractor. This makes the tracks very shallow and the seedbed can therefore be tilled very flat. Furthermore, road transport at longer distances is much more comfortable and safer with trailed equipment.

precise seedbed preparation, particularly for sugar beets, vegetables, rapeseed and maize

incorporating catch crops in spring

cultivating on ploughed ground

working depth of 3 – 15cm

individually guided spring tine elements

5 rows of tines and 3 rows of rollers per element

completely uniform tine distribution

additional reinforcing springs for deeper tillage (potatoes)

tractor-friendly transport due to chassis

perfect ground adaptation by individual elements

permanently equal working depth

field becomes particularly level

ideal germination conditions

very shallow work due to low tyre pressure possible

finer working pattern due to large number of tines

high passage by large beam distance and passage height

significantly higher impact than with PTO-driven machines